Who is responsible for an automatic gate at a school?

We get asked this more than almost anything else, usually somewhere near the end of a site visit, usually in a slightly worried voice. Someone has read that an automatic gate counts as machinery, they have worked out that this probably means somebody is legally on the hook for it, and they would quite like it not to be them.

The honest answer is that in most schools it is you. Not the installer, not the manufacturer, not the company who fitted it eleven years ago and has since gone quiet. Whoever occupies and controls the site carries the day to day duty for the equipment on it, and an automated gate is work equipment in the same way a boiler or a hoist is.

That sounds heavier than it is. Once you know where the line sits, it is a manageable, well trodden bit of estates admin. What causes the problems is not the duty itself. It is people assuming somebody else has it.

Where the responsibility actually sits

There are really three parties, and they each own a different slice.

The manufacturer and installer are responsible for the gate being safe when it is handed over. A new automated gate has to be designed, force tested and documented properly, and you should receive a file that proves it. If you have ever taken over a site and found no handover pack at all, that is a gap worth chasing, because it is the baseline everything else is measured against.

The school or the trust, as the party in control of the premises, is responsible for keeping it safe from that point on. Maintenance, inspection, repair, and taking it out of service if it is not right. This is the bit people are surprised by. A gate that was perfectly compliant on the day it was commissioned can drift out of compliance over a few years and carry on working the whole time it does.

The service contractor is responsible for doing the work properly and telling you the truth about what they found. What they cannot do is take the duty off you. You can delegate the task. You cannot delegate the responsibility.

If your site is PFI, or the land is held by the local authority, or you are a trust that has inherited a mixed estate, the picture gets more layered and it is worth reading your own agreement rather than assuming. In a multi academy trust the duty usually sits at trust level with day to day control delegated to each school, which is exactly why estates leads end up chasing gate paperwork across six sites at once.

What being responsible looks like in practice

Not much, if you have it set up. Broadly four things.

You know how many powered gates and barriers you have, and where they are. That sounds obvious until you try to write the list down. Sites acquire gates over time and nobody keeps a register.

They get serviced on a sensible schedule by somebody competent, and the certificate records actual force readings rather than just a signature and a date. A tick sheet that says "gate operational" tells you the gate opens. It does not tell you what happens when it meets a child.

Faults get dealt with rather than worked around. The classic is a safety photocell that keeps triggering, so somebody disconnects it to stop the nuisance. The gate now works beautifully and is considerably more dangerous than it was.

And you can find the paperwork. Handover file, risk assessment, service history. If someone from the trust or the HSE asked tomorrow, that folder is the whole answer.

The questions worth asking this week

Ask your site manager who last serviced each powered gate, and ask to see the certificate rather than the invoice. Ask whether the force testing figures are on it. Ask whether any safety device has been isolated or bypassed for any reason. And ask whether anybody has physically checked the manual release works, because on the day you need it you will not want to be finding out.

If the answers come back thin, that is not a crisis. It is a list.

Where we come into it

We install, service and repair automated gates, access control and school fencing across Bradford, Leeds and the wider Yorkshire area, and we have secured 300 plus schools, backed by 35 plus years’ experience in the trade. Airedale Fencing is Gate Safe accredited, SSIP assessed through PQS, a member of the Automatic Door Installation Association, and an accredited Paxton Partner 2026 on the access control side. Our automation work is led by an ADIA Authorised Automatic Gate and Barrier Technician, accredited through City and Guilds and QR verifiable, so you can check it rather than take our word for it. Our installation team is Enhanced DBS checked and carries recognised site cards, which matters more than people expect when the work is happening in term time.

If you want the fuller technical version, we have written up what a compliant school gate actually looks like and what your service certificate should record. If you would rather just have somebody look at yours, we survey gates on school sites regularly and will tell you plainly whether it is fine, whether it needs work, or whether it should be taken out of use today.

Either way, the useful first step is the same. Find out who thinks they are responsible for your gates, and check that they are right.